North Star Equipment

  • my cart
    0
  • compare product
    0

Panasonic BT-LH2170

Panasonic BT-LH2170
  • Panasonic BT-LH2170
  • Panasonic BT-LH2170
  • Panasonic BT-LH2170
Request Only
my cart my cart

The BT-LH2170 21.5" high performance LCD monitor offers native 1920 x 1080 full HD resolution; advanced 2D and 3D assist; high-quality IPS panel with wide viewing angle; and a production tough aluminum die-cast front frame. The LH2170 has an array of advanced features such as multiple professional inputs including; HD-SDI; 3G-SDI and HDMI; true color processing with a 3D look-up table (LUT); HD/SD closed captioning; 12V DC operation for field use; and an eco-friendly panel with mercury-free LED backlight and low power consumption.


The monitor’s high brightness (250cd /m²); high contrast (1000:1); horizontally-aligned IPS panel has 178 degree vertical and horizontal viewing angles. It delivers exceptional imagery with superb color accuracy and exhibits minimal changes in brightness and color due to the viewing angle. The LH2170’s 3D LUT with six-pole color correction includes a look-up table for each signal level; and applies 10-bit image processing to each RGB color to balance the six coordinate axes of the three primary colors (RGB) and their complementary colors (CMY); resolving color drifting at low light levels and keeping colors vividly natural. In addition; a black mode makes dark image areas in low-gradation scenes easier to view.


Its advanced 2D assist features include an in-monitor display; a Y-Map display that makes it easy to confirm a luminance level map; a Zebra display; and a two-window display; which allows for two separate HD/SDI inputs to be viewed simultaneously for comparing different signals. The two-window display can also be combined with advanced assist display functions; including Y MAP; which allows you to see the image at each luminance level in one window; while looking at the standard image in the other window.


The LH2170 monitor’s 3D assist functionality -- including a 24p input for use with 3D camera rigs -- is ideal for production crews that require 3D review in the field. The LH2170’s 3D assist functions include top and bottom display in addition to side-by-side display (for a 2D view of various 3D checks including composition; convergence; color and luminance; focus and zoom position; and parallax); and a Focus-in-Red focus assist to emphasize sharply focused image areas.


The LH2170 incorporates diverse video inputs and remote terminals to deliver superb operability in a system configuration; including 3G-SDI and HD/SD-SDI (with loop-through); HDMI; digital and analog DVI-I (Single Link); composite and GPI inputs; as well as RS-232C and RS-485. The new RS-485 Serial Remote permits up to 32 monitors to be connected in a loop-through configuration; each of which can be designated and controlled by a distinct ID number. TSL commands allow text display (8 alphanumeric characters) and tally indication. It supports two audio channels and audio monitoring via built-in speakers and headphone output.

Product Specification
Size 21.5 inch
Resolution 1920 x 1080
Panel Type IPS LCD panel
Aspect Ratio 16:9
Color Approx. 16,770,000 colors
Viewing Angle Horizontal: 178° Vertical: 178°
Input Connector SDI: BNC (x2)
SMPTE ST 424/274/296/259/ITU-R BT.656-4 standard
Embedded Audio supported
HD SDI: SMPTE ST 299 standard, 48 kHz, synchronous, 8 CH
SD SDI: SMPTE ST 272 standard, 48 kHz, synchronous, 4 CH
HDMI: (x1, type A terminal)
HDCP supported
Embedded Audio supported
VIERA Link not supported
DVI-I (x1, single link) HDCP supported

Audio Input: Pin jack (x2, stereo)
Input signal level: 0.31 Vrms
Output Connector SDI BNC: (x2, active through-out)

Video BNC: BNC (x1, through-out)
Power Requirements AC 100V - 240V, 50 Hz/60 Hz
DC 12V (11V - 17V)
Weight Monitor only: approx. 13.45 lb (6.1 kg)
Including stand: approx. 15.43 lb (7 kg)